Ans. 18 When the cone or tube turns into crimson hot, they're mentioned to be overheated; and is attributable to inadequate air passing through the cone. Ans. 21 Water within the tank reaching the sprayer; air passing over from the air vessel. If doable change over to a different tank. Ans. Thirteen So far as possible regulate the steam pressure by altering the oil and air pressures and not by shutting off or relighting sprayers: regulate the spindle of every sprayer to a cone stuffed with flame and have the identical amount of flame in each cone.

Ans. Eight The fan engines. You can dismiss the fan as an action. Ans. 11 The windows are fitted in the uptakes and smoke packing containers, one at every finish , Best slots online behind the further hangs a gentle, and the mirrors are so fitted that when little or no smoke is being made, the light is reflected and could be seen from the stokehold plates. Ans. 23 By closing down the pump suction valve and opening the "shifting cock". When adequate air has been admitted, close the cock and Free slots open the suction valve.

Ans. 7 To combine air with the oil earlier than combustion takes place. Ans. Sixteen Never use something harder than copper wire for Free Online slots best slots to play online for NO money (Www.Slotsmobilefree.Com) cleaning the holes in the cap, see that the joints of the body and cap are completely clean and Free slots from burrs. Ans. 10 Glass home windows, mirrors and sight holes in the furnaces. Ans. 19 The interior floor of the cone being lined with oil because of:- the temperature of oil too low; too much air; angle of spray not quite right: correct angle by altering spindle.

Ans. 5 By raising the temperature a extra efficient atomising is obtained, the oil turns into extra the consistency of water and subsequently spraying in finer particles, which combine more readily with air. Ans. 25 The flames being compelled from the furnace into the stokehold.